Mono Bikes

Owner: Scott Richardson

Rider: Scott Richardson

Engine: Suzuki DR800

Chassis: MHD (Mark Hodge Developments, UK)

BHP: 79

Weight: 135kgs

Specification: Mark Lawes engine, downdraft head, twin Kheins, MHP 1-2 exhaust, Maxton rear suspension, TZ250 front forks and wheels, fat bloke on board.

Click HERE to send your bikes' specification

Owner: Tony & Mark George

Rider: Mark George

Engine: Yamaha 450cc

Chassis: Yamaha TZ125

BHP: 55

Weight: 88kgs

Specification: Essentially, a Yamaha TZ125 rolling chassis with a Yamaha  motocross donor engine

Owner: East West Racing (Martin & Peter Purvey)

Rider: Nick Chadwick

Engine: 2004 KTM 610 supermoto.  Tuned by KTM,  6 speed gearbox & slipper clutch with 41mm flatside carb.

Chassis: GRC (Gary Cotterell, UK) tubular construction

BHP: 70

Weight: 95kgs

Specification: Built new for 2005. Honda RS125 front forks, disc & caliper, swinging arm (modified by Gary Cotterell.  Movie Star fairing with letterbox air intake with fully in closed airbox.  Dymag carbon wheels (TZ250 cush drive on rear).  Honda RS125 seat & petrol tank (modified by Gary Cotterell.  Click HERE for East West Racing's website

Owner: Richard Rowley

Rider: Richard Rowley

Engine: Rotax 640cc

Chassis: Tigcraft (Dave Pearce, UK)

BHP: Est. 67

Weight: Est. 100kgs

Specification:

Owner: Perry Goldstein

Rider: Perry Goldstein

Engine: KTM

Chassis: John Deiterman (UK)

BHP: 70

Weight: 100kgs

Specification:

Owner: Smith Brothers

Rider: 

Engine: 

Chassis: NWS (UK)

BHP: 60

Weight: 95kgs

Specification: ?

Owner: Clive Chitty

Rider: Clive Chitty

Engine: BMW

Chassis: GRC (Gary Cotterell, UK)

BHP: ?

Weight: ?

Specification: ?

Owner: Ivan Portah

Rider: Ivan Porter

Engine: Rotax 640cc

Chassis: Yamaha TZ250

BHP: 70

Weight: 130kgs 

Specification: Fuel injection for 2005.  ENGINE Bore/Stroke: 100mm Omega Piston X 79.4mm std Rotax Crank 860 Rotax cam with 36mm Inlet and 30mm Exhaust valves Hejira stainless steel exhaust pipes Standard Rotax Close ratio 5 speed gear box 70bhp @8000rpm  51ft/lb @6500rpm Emerald M3DK Engine Management system <www.emeraldm3d.com> Jenvey 48mm tapered throttle body, inlet trumpet, fuel rails www.jenvey.co.uk Emerald throttle position sensor 'Porter Racing' inlet manifold twin 253cc/min fuel injectors - (shower form option) Aeroquip hoses and fittings 3 bar fuel pressure regulator, 2ltr/min electric fuel pump, SPA fuel pressure and oil temp gauge 'Porter Racing' 36-1 tooth crank wheel with 'Porter Racing' crank position sensor 'Porter racing' fuel swirl pot 'Porter racing' engine and ancillary wiring harness with OE spec connectors and terminals Engine temp, air temp and barometric pressure sensors Dynojet Wide band Air Fuel Ratio module with data logging Standard Rotax generator, 'Porter racing' regulator/rectifier, Red Top 12v Battery CHASSIS Dymag 5 spoke carbon fibre wheels 3.5 & 5.5 x 17 Penske rear shock made to measure 1990 Yamaha TZ 250 "A" Chassis, brakes, linkage and modified swinging arm and USD front forks wheel base 1320mm weight 120kg

Owner: Bret Price ?

Rider: Bret Price

Engine: Yamaha XTZ686

Chassis:  Harris (UK)  First Harris frame to house XTZ engine.

BHP: 75

Weight: 135kgs 

Specification: Engine built and prepared by Steve Ruth; Slipstream downdraft head; solid balancer shaft gears; undercut gearbox with close ratio 5th gear; Nikasil barrel; Carillo rod; Keihin 38mm flatsides; Harris/Gibson 2 into 2 exhaust; Ohlins rear shock and fork springs; Former owners include Steve Ruth, Dave Walker,Steve Allen & Dave Bennett

Owner: Fuzz Townshend

Rider: Rob Hunt

Engine: Yamaha 762cc, tuned by Slipstream & built by Steve Ruth

Chassis:  Ex-Naoki Matsudo Yamaha Kurz TZM GP250 chassis (#CGE0001)

BHP: 83

Weight: 117 with oil & water, but no fuel 

Specification: Suter dry slipper clutch, MuZ spec downdraft cylinder head, Dymag carbon fibre wheels, Pete Gibson exhausts & silencers, Techtronics dash & quickshifter, Sebimoto carbon fibre bodywork

Owner: Mick James

Rider: Mark Lawes

Engine: Pami BMW

Chassis: GRC  

BHP: ???

Weight: ???

Specification: